Plow Package includes: Aluminum Blade, Push Frame, Hardware Kit, Angling Interceptor & 2" Model-Specific Front Mount.
No more hassling with shovels or snow blowers in the cold! Now you can plow snow from the comfort of your heated truck or SUV and clear snow in less than half the time with the SNOWSPORT® HD Utility plow. SNOWSPORT® HD's heavy-duty construction allows for plowing in the most demanding conditions. It easily attaches to the front of your vehicle with our model-specific mount that's included with the blade. The complete utility plow package comes with a One Year Warranty on the plow blade and a Three Year Warranty on the rubber cutting edge.
NOTE: These front mounts require 8 to 16 inches of clearance from under receiver to level grade when installed. Vehicle's with suspension modifications (oversized tires, lift kits, etc.) could encounter improper fitment for SNOWSPORT® plow use.
With no tricky wiring or complicated install, our plow has become an industry leader in practicality. Our push frame simply slides into the front mount and is secured with a pin. This trouble-free process means you will be plowing in minutes and that the utility plow can easily be stored between uses.
With increased options, comes increased performance, that's why the SnowSport® HD gives you an adjustable 3 point position blade. Featuring straight or dual angled blade positions, our pivoting plate makes it quick and easy to switch to the one that will work best for you.
The flexible box ends keep snow from spilling out the sides, expanding its plowing width and saving you time. The versatile design makes the SnowSport utility plow perfect for all kinds of demanding conditions including pushing heavy wet snow, powering through drifts or clearing hard packed snow banks.
By holding the blade in place when plowing and securing it while transporting at highway speeds, quick pins give new meaning to the phrase "job security". Best of all it takes only seconds, works under the most demanding conditions and can be operated with gloves on.
No Lights Needed
Increased visibility and safety are important factors that we put into manufacturing our blade. That is why the practical design does not block headlights in plow or transport position.
Built in trip edge works on concrete, brick, black top, gravel and grass surfaces.
- Anodized 6063-T6 aluminum extruded blade
- Model specific front mount included in package
- No extra front suspension support needed
- 84" and 96" blades available
- Each blade is 18" high x 3" thick
- Heavy duty 1" thick rubber cutting edge
- Includes two Blade Markers
- Includes Box Ends
- Blade weight approx. 110 lbs.
- One Year Warranty on the plow blade
- Three Year Warranty on the rubber cutting edge
Can I install a SNOWSPORT® Utility Plow myself?
Installation is simple and the instructions are clear-cut. The blade and push frame for all plows should assemble in a little over an hour. To install the front receiver hitch for the SNOWSPORT® HD Utility Plow or the SNOWSPORT® LT Utility Plow, plan an additional 30-60 minutes depending on your level of experience. From there the blade attaches in minutes. If you do need assistance, call 1-800-689-6612 between 8:00am – 5:00pm CST.
What does "fascia trimming may be required" mean?
Some front mounts may require fascia trimming. What this entails is that the front receiver portion of the mount may interfere with the lower air dam of the vehicles bumper. Fascia trimming is required when this is the case. It requires a notch being cut into the lower air dam.
How easy is the snow plow to hook up or un-hook between jobs?
The plow is designed to easily attach to your vehicle. Just insert the push frame into the front/rear receiver hitch and secure with the hitch pin. Then hang the blade, one end at a time, onto the push frame and secure the blade with locking pins. This process can be done in less than a minute. Unhooking the plow from the vehicle is just as easy, simply reverse the process.
Average Customer Rating: (16 customer reviews)